<track id="yfud5"><span id="yfud5"><em id="yfud5"></em></span></track>
    1. <tbody id="yfud5"><span id="yfud5"></span></tbody>

      <nobr id="yfud5"><address id="yfud5"><big id="yfud5"></big></address></nobr>

      News Center

      Industry News

      How to repair accuracy of linear guides

      Time:2019/9/15Author:adminClick: 1492
      How to correct the accuracy of the linear guide
       
        It's hard to completely rework the guide rails. But if you just want to make it more accurate than it is now, there is still a way to do it.
        If the two linear guides are used in pairs, first loosen the two sliders on one of the guide rails and the assembly screws of the workbench. Push the slider from the outer side of the guide rail by hand while locking the push slider. The upper screw. The other slider is still working. Then the other side rail is preloaded. The method is the same as above, but two people are required to operate. You push the slider here and push the table on the other side. , with you to push.
       
      This method uses the combined orientation of the four sliders to eliminate the gap. After the operation is completed, you need to try the smoothness of the workbench. The next method is more professional, that is, to change the steel ball inside the slider. The rod will be relatively simple. As far as the screw is a double nut, it is very good. Only need to thicken the pre-pressure washer. Loosen and remove the positioning button on the double nut. Take out the preload Washer (two and a half circles), the simple way is to attach the paper on the top and then plug it back. You can choose the thickness of the paper according to the tightness of the screw. If it is a single screw, it is more troublesome. The solution is to add preload.
      溧阳几哉酒店有限公司 丝网上海有限公司| 带式干燥设备有限公司| 家电维修售后服务有限公司| 排污泵有限公司| 分析仪器有限公司| 福州郢盛设备机械有限公司| 广州市茉莉珂制冷设备有限公司| 空气压缩机北京有限公司| 分析仪器有限公司| 热电偶北京有限公司| 360 43 11 184 231